PCT-I-50 Oil Well Cement

Application

PCT I-50 is used for primary cementing of casing strings in oil and gas wells, cementing of shallow intervals, isolation of water-bearing and permeable formations, preparation of conventional oil-well cement slurries, and plugging / abandonment where the cement system is designed for low and normal temperature conditions. For each cementing interval, cement grade and slurry design must be selected according to actual well conditions — temperature, pressure, depth, required slurry density, thickening time and compressive-strength requirements. Slurry properties can be adjusted with cementing additives; the final formulation should be verified by laboratory testing under simulated well conditions.

Technical characteristics (quality certificate)

Typical values as stated on a mill quality certificate (passport) for a standard commercial grade. Actual lot values are confirmed in the COA / TDS for the selected manufacturer.

Reference profile for orientation. For each supply we confirm grade, origin and certificate data against your specification, well conditions and delivery requirements.

Typical functions

• Primary casing cementing in oil and gas wells
• Casing support and zonal isolation
• Low and normal temperature applications (15–50°C)
• Base cement for conventional slurry systems with additives

Product information

Chemical name

PCT I-50 Oil Well Cement (GOST)

Formula / class

PCT-I-50

Appearance

Grey Portland cement powder. Colour may vary slightly by plant and clinker source.

Packaging

Primarily 1.0 t MKR (FIBC); 50 kg bags also available.

PCT I-50 is a non-additive well Portland cement per GOST 1581-2019, intended for well cementing at 15–50°C. Actual physical and chemical properties depend on the manufacturer and production batch. TDS, quality certificate, SDS/MSDS, COA and certificate of conformity are available on request.